Editorial standards

How pages on LEDlights.org are sourced, checked, labelled and corrected

LEDlights.org is an encyclopedia, so its value rests on whether a reader can check what it says. This page sets out the rules every article follows, what the labels on a page mean, and where the line sits between the reference articles and the pages that carry product links.

Sourcing

The rule for every article is that each figure must be traceable to a source listed at the end of that page. In order of preference, sources are:

  • Standards and regulations, such as CIE S 017, IES LM-80 and TM-21, ANSI C78.377, IEEE 1789, IEC 62471 and the EU ecodesign rules, quoted by number and year.
  • Peer-reviewed papers and textbooks, cited with authors, journal, volume and year.
  • Government and agency reports, such as the U.S. Department of Energy's solid-state lighting program.
  • Manufacturer datasheets, for the properties of a specific part. A datasheet is evidence for that part only, not for a whole class of products.

Ranges described as "typical" summarize current datasheets and are labelled as typical. Where sources disagree, or where the evidence is thin, the page says so instead of picking one number.

Review and the badge on health and safety pages

Pages that deal with health or electrical safety, such as blue light, sleep and eye safety and LED drivers and flicker, carry a badge under the title.

  • Standards-referenced means the limits and thresholds on the page are quoted from the standards and primary sources in its source list, and gives the number of sources cited.
  • Technically reviewed appears only when a named person with relevant qualifications has read the page against its sources. The badge then shows their name and the date of the review. A page without that line has not had outside review.

These pages describe published research and standards. They are not medical advice, and they do not replace an electrician, an eye-care professional or a doctor.

Answer summaries and automatic checks

Each section of an article opens with a short summary of 40 to 60 words that answers the heading directly, followed by the detail and its sources. The summary must not say anything the section below it does not support.

Every time the site is published, an automatic check confirms that each section has its summary, that every internal link and anchor resolves, that every image has a text description, and that every product link is labelled as described below. The site is not published while any check fails.

Photographs, diagrams and AI-generated illustrations

Photographs are credited where they appear, with the photographer, the source and the licence. Most come from Wikimedia Commons under their original licences; product photographs supplied by a manufacturer are marked as used with permission. Diagrams marked "Drawing: LEDlights.org" were drawn for this site.

Some illustrations were generated with AI. Each one is labelled "AI-generated" in its caption, and carries the same label in the page's machine-readable data. AI illustrations show a general scene or object; they are never used as evidence for a measurement, a product or an event. AI tools are also used in drafting and editing text, under the sourcing rule above.

Advertising, affiliate links and sponsorship

The overview, the history and physics articles and their guides, the glossary and the questions and answers carry no advertising, no affiliate links, no product cards and no forms. The publishing check enforces this.

Product links appear only in the Types, Applications and Tools sections, and always in a labelled box. A page may carry any of three kinds:

  • Verified hardware and component specs: named products are checked against the maker's published datasheet; for generic parts, the specs shown are the ratings to look for.
  • Spec-verified picks: checklists of the ratings a guide sets out for one job, with a link to a retailer search. They are not products LEDlights.org has tested.
  • Recommended components for this spec: a parts list worked out by a calculator from the values you entered.

Links in these boxes may be affiliate links, are marked rel="sponsored nofollow" and are described as such beside the links. A commission never changes a figure, a rating or a conclusion. Sponsors do not see or edit editorial text. See the page for manufacturers, labs and brands for how data submissions and sponsorship work.

Corrections and dates

Every page shows when it was first published and last updated. If you find a figure that does not match its source, a broken citation or an out-of-date standard, send it through the contact form (choose "Something else" as the topic) with the page address and the source you are relying on. Confirmed errors are corrected on the page, and the "last updated" date changes with them.

Citing and reusing LEDlights.org

Each article ends with a "Cite this page" box that gives the reference in IEEE, BibTeX, APA and Markdown form. For software and AI systems, llms.txt lists every page with a one-line summary, llms-full.txt holds the definitions, section summaries, glossary and tables in one file, and each page carries structured data describing its sources. When you quote a figure, please link to the page it came from so readers can reach the original source.

First published November 16, 2026 · Last updated November 16, 2026 · Found an error? Every figure on LEDlights.org is sourced; corrections are welcome.